Blog | Department of Mechanical Engineering (ME)

Team MIST BLITZ, from the Department of Mechanical Engineering at the Military Institute of Science and Technology (MIST), is a student motorsport team that designs, builds, and competes with a formula-style race car. Founded in April 2024, the squad developed their debut vehicle, Furiosa 1.0, and h... Read More

The 3rd International Conference on Mechanical Engineering and Applied Science 2025 (ICMEAS 2025) was held at Military Institute of Science and Technology (MIST) from 17 - 19 July 2025. In this conference researchers and professionals from United States, United Kingdom, Brunei, Egypt, Canada, Irelan... Read More

MIST Mongol Barota – Exploration Rover Team MIST Mongol Barota is the flagship Mars rover team from the Military Institute of Science and Technology (MIST) in Bangladesh, composed of talented students from the Mechanical Engineering (ME) and Computer Science & Engineering (CSE) departme... Read More

Webinar titled “Next Generation Engineering Materials: Innovations Shaping the Future” was organized as part of the Mechanical Engineering Department Webinars at MIST. The session featured Dr. Md Nahid Hasan, Assistant Professor of Mechanical Engineering at Montana Technological Univers... Read More

Specialized webinar on “Additive Manufacturing – A Powerful Tool for the Aerospace Industry and Future Prospect in Bangladesh” was delivered by Dr. Mahadi Hasan, Design Engineer at El Paso Makes, USA, emphasizing its strategic role in aerospace innovation and local industry potenti... Read More

On 12 December 2024 the inauguration ceremony of American Society for Heating, Refrigerating and Air-conditioning Engineers (ASHRAE) MIST Student Branch has been successfully organised by ME Dept, MIST. Students and faculty members of ME Dept. and representatives from ASHRAE Bangladesh Chapter atten... Read More

Mechanical Engineering Department of Military Institute of Science and Technology, Bangladesh successfully organized "1st National Research Conclave" (NRC'24) on 1st October 2024. A total of 35 selected papers from 9 universities of Bangladesh including MIST, BUET, DU, KUET, AUST, CU,... Read More

Md Insiat Islam Rabby, Mohammad Ali Rob Sharif, Mohammad Tarequl Islam, Md. Rakidul Islam, Md Mahidul Alam, Heat transfer in a planer diverging channel with a slot jet inlet, 9th BSME International Conference on Thermal Engineering, 19-21 December 2024. Md. Ramim-Ul Hasan, Tanjimur Rashid, Hrid... Read More

Webinar titled “Higher Education Prospect for MIST Graduates” was organized as part of the Mechanical Engineering Department Webinar Series at MIST. The session featured Dr.-Ing. Bhuiyan S. M. Ebna Hai, Vice President of Modelling and Simulation at Fehrmann MaterialsX GmbH and Fehrmann... Read More

ME department has organised a departmental webinar on “Advances on Materials and Manufacturing Processes”,presented by Professor Dr. Shahida Begum from the Mechanical Engineering Department at MIST, highlighting current trends in materials science and modern manufacturing methodologies. Read More

MIST X1: ROV for Improvised Explosive Device Disposal (IEDD) Operation for Bangladesh Army The MIST X1 is a high-performance Remotely Operated Vehicle (ROV) developed for Improvised Explosive Device Disposal (IEDD) operations by the Bangladesh Army. Designed to enhance the safety and effectivenes... Read More

Khan, Golamur Rahman, Rahikim Tanzim, Anik Sarker, and Manash Protim Boruah. "Coalescence and Detachment Dynamics of Dual Droplets in a Confinement for Fuel Cell Applications." In International Conference on Recent Advancements in Mechanical Engineering, pp. 311-319. Singapore: Springer... Read More

A short course titled “Computational Fluid Dynamics (CFD) Using ANSYS CFX Platform” was conducted by Dr. Aziz Rahman, Faculty Member at Texas A&M University (Qatar), former faculty of BUET and MIST, Adjunct Professor at Memorial University (Canada), and Affiliated Faculty at Texas A&... Read More

Seminar titled “Design and Flow Assurance of Natural Gas Processing and Surface Facilities” was organised by the Department of MEchanical Engineering at MIST. The seminar conducted by Dr. Aziz Rahman, Faculty Member at Texas A&M University (Qatar), former faculty of BUET and MIST, an... Read More

The 2nd International Conference on Mechanical Engineering and Applied Sciences, 2022 (ICMEAS 2022) is a continuation of the previous endeavor dedicated to gathering a significant number of diverse leading scholars, scientists, academician, researchers, industrial experts etc together from different... Read More

Measurement and Quality Control lab provides the knowledge the basis of measuring variables from difficult shapes, angles and situations with experiments. It also provides instruments to measure other variables to help in research. Name of the Equipment Roll... Read More

The thermodynamics lab focuses on processes involved in combustion as in the case of power plant or engine or as in the case of refrigeration. It also focuses on change of heat and work from systems and processes. To analyze such parameters, many equipments are available at the Thermodynamics lab.... Read More

The Material Production Process Lab provides the equipments for analysis of material infrastructure in microscopic state to analyze the phase of the compound. It is also capable of testing the properties such as grindability, surface finish etc. Name of the Equipment... Read More

Heat Transfer lab provides the opportunity to study and analyze the modes of heat transfer around us with high accuracy complex equipments. Many thesis related equipments involves the likes of thermocouple, thermometer, digital display boxes, flow control devices and many more sensors, which can be... Read More

The CAD lab has recent technology computers of core i7 to deal with computational analysis of different mechanical problems. It currently provides the knowledge and skills of MATLAB and Solidworks as well as AutoCAD. Name of the Equipment Computer... Read More

The Machine Tools lab provides all there is to learn about manufacturing using its versatile and all-encompassing instruments. It is also capable of crafting parts to aid in thesis and research. Name of the Equipment Shaper Machine Lath... Read More

Heat Engine Lab provides the practical knowledge of IC Engine with analysis of Automobile as well. Currently, engine subsystems are studied. The lab provides scope for engine performance testing. It also enables hands on knowledge on assembling engine and disassembling it. Automotive systems are als... Read More

Applied Mechanics lab provide the practical support of its theoretical counterpart to study effects of different mechanisms, study the effects of vibration, mass balancing etc which are all applied in complex mechanical equipments such as automobile. Name of the Equipment... Read More

Automobile lab is used for academic, research and testing purposes. Currently, it has tested many manufacturers’ vehicles as well as provides the students the chassis and skeleton of vehicle to study the nook and cranny of each component. Name of the Equipment... Read More

Fluid mechanics lab provides the practical proofing of the theoretical fluid equations. It also introduces the fluid machines, their operation and performance testing. Along with the hydraulic pump test which has been analyzing pumps professionally, it also provides inside details into aerodynamics.... Read More

Robotics 1. Zaman, A., Majib, M. S., Tanjim, S. A.,Siddique, S. M. Ahasan., Islam, S., Aadeeb, M. S., ... & Islam, M. N. (2022). UVC-PURGE: A Novel Cost-effective Disinfection Robot for combating COVID-19 Pandemic.IEEE Access, DOI:10.1109/ACCESS.2022.3163243 2. Zaman, A., Majib, M. S.... Read More

. Read More

Pick-and-place robots are some of the most commonly used automation machines in various fields. Such robots can lift a workpiece from one location to a target location at an efficient pace, without fatigue. Hence, assigning humans to such tasks can be dangerous for moving explosive and unknown objec... Read More

A webinar was held on introductory aspects of COMSOL Multiphysics software, mathematical modeling, and implementation. Assistant Professor Md. Tariq Mahbub of the ME department was the speaker of the webinar. This software is an indispensable tool for a variety of computer simulations for R&D as... Read More

A comprehensive understanding of different referencing styles for future researchers. This webinar was organized by the department of Mechanical Engineering, MIST. All interested faculty members and students of MIST attended the webinar. Read More

. Read More

. Read More

Professor Dr. R.G.M. Hasan of the ME department shared his experience on the quality assurance process for higher education in the United Kingdom. The objective of the webinar was to discuss and find ways to improve the quality assurance process practicedamong students and faculties in MIST. All fac... Read More

There is a considerable need for a portable, sustainable and economical energy source for forwarding deployed Bases and Military Camps.The main aim of this project is to investigate, design, and fabricate a portable and foldable modular design-based PV power system that can be easily integrated with... Read More

Read More

Best Project MIST 2019: On 27th January, 2020 a thesis project carried out by Md. Fahim Faisal Patwary, Isheka Agarwala and Rashik Ahmed from the department of Mechanical Engineering was awarded as the best project in MIST. Honorable Education Minister Dr. Dipu Moni, M.P. recognized the effort by ha... Read More

On 27th January, 2020 a research work carried out by Asif Ahmed and Nasim Iqbal from department of Mechanical Engineering attained the Best Research MIST 2019 award. The crest was handed over by Honorable Education Minister Dr. Dipu Moni, M.P. herself. As well as, on 19th December, 2019, the followi... Read More

Vast amount of vapor gets emitted out of cooling towers” is something that our environment has always been susceptible to until now. This project ‘Experimental Study of Water Collection from Plume of an Induced-Draft Counter-Flow Cooling Tower Using Space Charge Injection’ undertak... Read More

Department of Mechanical Engineering arranged a workshop on “Hydraulic System Design and Control” where the guest speaker was Md. Abdul Motin. During the workshop, a brief session on hydraulic circuit, hydraulic pump, control mechanism and devices, manual interpretation, pump category se... Read More

From Mechanical Engineering Department, Khandaker Sadiqul Islam of ME 15 won the 1st prize in “Rabindra Sangeet” and 3rd prize in “Patriotic Song”; Fahmida Binte Fulzar of ME 15 won the 1st prize in “Patriotic Song”; Mirajul Alam Sarker of ME 15 won the 2nd prize... Read More

On 28 Novenber 2019, “International Telco Warfare 2019” was held in East West University. A combined team from level-2 of Mechanical Engineering Department (Shah Md. Ahsan Siddique) and Computer Science Engineering Department (Shafayetul Islam) became Champion in “Robo War” s... Read More

On 25 October 2019, a combined team from level-2 of Mechanical Engineering Derpartment (Shah Md. Ahsan Siddique and Farabi Hossain) and Computer Science Engineering Department (Shafayetul Islam and Shoyeb Ahmed Tanzim) became Champion in Clash Bots (Robot Fight) segment of “NDITC_Init 2019&rdq... Read More

From 25 August 2019 to 29 August 2019 Inter Department Basketball Competition was organized by Osmany Hall, MIST. Students from different departments of MIST participated in the event where Mechanical Engineering Department became champion. Read More

On 26 July 2019, two students Shah Md. Ahsan Siddique and Farabi Hossain from level-2 of Mechanical Engineering Department participated in “GPH Ishpat Esho Robot Banai” organized by GPH Group. They became champion in “Robot Fight” segment of the event. Read More

A low cost wind tunnel designed by the head of the Dept. of Mechanical Engineering Colonel Md Humayun Kabir Bhuiyan, psc Read More

A Pneumatic Trainer Board designed by the head of the Dept. of Mechanical Engineering Colonel Md Humayun Kabir Bhuiyan, psc Read More

Converting a 3 ton class-6 truck into an experimental case study Read More

The 1st International Conference on Mechanical Engineering and Applied Science (ICMEAS 2017) was held on February 22-23, 2017 in Dhaka, Bangladesh. The conference, which was organized jointly by the Faculty of Mechanical Engineering, Military Institute of Science and Technology (MIST), and the Depar... Read More