MIST Applications

Academic Apps

Important Apps

Other Apps

Help & Support

Blog | Department of Mechanical Engineering (ME)

Prominent Publications of ME Dept. (2024)

Prominent Publications of ME Dept. (2024)
  1. Md Insiat Islam Rabby, Mohammad Ali Rob Sharif, Mohammad Tarequl Islam, Md. Rakidul Islam, Md Mahidul Alam, Heat transfer in a planer diverging channel with a slot jet inlet, 9th BSME International Conference on Thermal Engineering, 19-21 December 2024.
  2. Md. Ramim-Ul Hasan, Tanjimur Rashid, Hridoy Bhadra, Mohammad Mehedi Hasan, Md. Omar Faruq, Fazlur Rashid, and Md. Emdadul Hoque (2024). Managing Blended Human-Robot Collaboration (HRC) Challenges in Industrial Systems: A Review. IUT Journal of Engineering and Technology, vol. 16(1), 14-25.
  3. Md. Shahriar Hossain, Md. Hasib Mahmud Mazumder, Md. Rakidul Islam, Sheikh Zabed Moyeen, and Mohammad Ali, Aerodynamic Analysis of NACA 4412 Airfoil with Leading-edge Slot, Groove, and Slotted Flap Configurations: A Computational Approach,  9th BSME International Conference on Thermal Engineering, 19-21 December 2024.
  4. Investigation on Torque Coefficients of Horizontal Axis Wind Turbine with Symmetrical and Asymmetrical Split-tip Winglets, T.A. MUMU, M. Q. ISLAM, M. D. ARIF, SSRN Electronic Journal (2024); https://papers.ssrn.com/sol3/papers.cfm?abstract_id=4860862
  5. Performance Enhancement of PV Module with Cooling Effect using Wet Wicks, T.A. MUMU, A. M. A. SMRITY, A. BHUYAN and A.K.M. S. ISLAM, IOP Conference Series: Materials Science and Engineering (2024) https://iopscience.iop.org/article/10.1088/1757-899X/1305/1/012028
  6. S. Bhowmick et al, “Design and Fabrication of a LiBr Absorption Refrigeration System to Utilize the Waste Heat of Engine Exhaust Gas for Vehicle Cabin Cooling Application,” proceedings of the 14th International Conference on Mechanical Engineering (ICME), BUET, Dhaka, Bangladesh, Dec 18-19, 2023. Available at SSRN electronic Journal: http://dx.doi.org/10.2139/ssrn.4861185 . (June 11, 2024).
  7. Rafat, M. T., Shuchi, T. Z., Evan, F. R., & Rahman, M. A. (2024). Mechanical and absorption properties of carbon-basalt and glass fiber reinforced composites: A comprehensive study with implications for advanced manufacturing technology. Results in Materials, 23, 100615.
  8. Faruq, M. H. A., Jahin, A. S., Samin, J. H., Chhoa, M. F., & Ishraq, H. (2024). Numerical Investigation of Crude Oil Transportation by Core Annular Flow Along with Varying Flow Velocities and Annular Fluids. Proceedings of 2nd International Conference on Mechanical, Manufacturing and Process Engineering 2024.
  9. Islam, Towhidul, Md Wasi Uddin, and Rokib Uddin. "Finite element analysis of motorcycle suspension system stability using different materials." Journal of Engineering Research 13, no. 2 (2025): 1230-1240.
  10. Rabby, Md. Insiat Islam, Mohammad Ali Rob Sharif, Mohammad Tarequl Islam, Md. Rakidul Islam, and Md. Mahidul Alam. “Heat Transfer in a Planer Diverging Channel with a Slot Jet Inlet.” arXiv, November 13, 2024. https://arxiv.org/abs/2411.08573
  11. Rabby, Md. Insiat Islam, and Md. Wasi Uddin. “Convection Heat Transfer Augmentation Inside a Hybrid Corrugated Channel by Varying the Positions of Corrugated Configurations.” Case Studies in Thermal Engineering 52 (2023): 103719. https://doi.org/10.1016/j.csite.2023.103719
  12. Faisal, Md Fahim, Sazedur Rahman, Md Zillur Rahman, Md Anisur Rahman, Jerin Tasnim, and Yeadul Islam Sazal. 2023. “Modeling Approaches for Bio-based Composites.” In Elsevier eBooks, 672–92. https://doi.org/10.1016/b978-0-323-96020-5.00181-3.
  13. Aninda, Rayan Karim, Shazrina Mariam Karobi, Redwan Shariar, Md Musfiqur Rahman, and Md Insiat Islam Rabby. "Effect of post-weld heat treatment on mechanical properties and microstructure in electric arc welded mild steel joints." Journal of Engineering Research 12, no. 2 (2024): 210-215.
  14. Rashid, Mahatab Bin, Nafiul Islam, and Insiat Islam Rabby. "Laminar Convective Heat Transfer Across a Circular Pipe by using MWCNT+ Fe3O4 Hybrid Nanofluid: A Numerical Study." In IOP Conference Series: Materials Science and Engineering, vol. 1305, no. 1, p. 012005. IOP Publishing, 2024.
  15. Sultana, Afsana, Md Ahad Bin Alam, and Md Afsar Ali. "Thermo-elastic Characteristics of Thermal Barrier Coating in a Gas Turbine Combustion Chamber with an Intermediate FGM Layer." In IOP Conference Series: Materials Science and Engineering, vol. 1305, no. 1, p. 012031. IOP Publishing, 2024.
  16. Islam, Mohammad Tarequl, Tanvir Ahmed Fahim, Mohammad Ali, and Joyeb Hassan. "Thermal Performance Analysis of a Rectangular Finned Heat Sink under Dust Deposition." In IOP Conference Series: Materials Science and Engineering, vol. 1305, no. 1, p. 012008. IOP Publishing, 2024.
  17. Siddique, Ahasan, Sadman Tajwar Shahid, Wasi Uddin, Mohammad Tarequl Islam, and Humayun Kabir Bhuiyan. "Mechanical Properties and Microscopic Evaluation of Heat Treated D6A Ultra High-Strength Steel." In IOP Conference Series: Materials Science and Engineering, vol. 1305, no. 1, p. 012010. IOP Publishing, 2024.
  18. Bhuiyan, Humayun Kabir, Ahmed Afif, Mohammad Ashrafur Rahman, and Anik Sarker. "Design, Construction, and Investigation of the Drying Equipment Using Solar Power for Bangladeshi Fruits and Vegetables." In IOP Conference Series: Materials Science and Engineering, vol. 1305, no. 1, p. 012013. IOP Publishing, 2024.
  19. Afif, Ahmed, Md Humayun Kabir Bhuiyan, Juliana Zaini, Abdalla Mohamed Abdalla, Seikh Mohammad Habibur Rahman, and Abul Kalam Azad. "Structural and Electrochemical Performance of Sr0. 9La0. 1WO4 Electrolyte Materials for Solid Oxide Fuel Cells." In IOP Conference Series: Materials Science and Engineering, vol. 1305, no. 1, p. 012025. IOP Publishing, 2024.
  20. Faisal, Md Fahim, Naheen Ibn Akbar, and Abdul Hasib Hasan Zayed. "Development and analysis of additively manufactured non-pneumatic tires for mars rover." In IOP Conference Series: Materials Science and Engineering, vol. 1305, no. 1, p. 012026. IOP Publishing, 2024.
  21. Rafat, Tanzim, Tanjim Zahin Shuchi, Faizur Rahman Evan, and Insiat Islam Rabby. "Aerodynamic and Flow Characteristics of a Rough Airfoil: A Numerical Study." In IOP Conference Series: Materials Science and Engineering, vol. 1305, no. 1, p. 012003. IOP Publishing, 2024.
  22. Rabby, Insiat Islam, HM Khairul Enam, Wasi Uddin, Afsana Sultana, Rokib Uddin, and Mahfuz Alam. "Potential Nanoparticles to Integrate with Ceramic Membranes for Treating Industrial Wastewater: A Review." In IOP Conference Series: Materials Science and Engineering, vol. 1305, no. 1, p. 012001. IOP Publishing, 2024.
  23. Rabby, Md Insiat Islam, Siti Ujila Masuri, Ahmad Syakir Fariz Bin Samsul Kamal, Abdul Aziz Bin Hairuddin, Nuraini Bt Abdul Aziz, and Zulkiflle Bin Leman. "Numerical investigation of disk bypass pipeline inspection gauge with hole in disk." Journal of Engineering Research (2024).
  24. Rabby, Md Insiat Islam, Md Wasi Uddin, and Farzad Hossain. "Impact of non-uniform heat flux conditions on convective heat transfer and energy efficiency in a corrugated tube." Heliyon 10, no. 11 (2024).
  25. Majumder, MOHAMMAD MOBARAK HOSSAIN, M. S. H. Bhuiyan, and M. Q. Islam. "An Experimental Investigation into Wind Effect on Tall Buildings with Pentagonal Cross Section." In IOP Conference Series: Materials Science and Engineering, vol. 1305, no. 1, p. 012034. IOP Publishing, 2024.
  26. Sultana, Rokiya, Mohammad Tasawar Islam, Gazi Shariair Iqbal Nayeem, Muammer Din Arif, and Golam Mostofa. "Experimental Cooling Performance Evaluation of Different Coolants for Data Centre." In IOP Conference Series: Materials Science and Engineering, vol. 1305, no. 1, p. 012018. IOP Publishing, 2024.
  27. Rahman, Sazedur, Md Zillur Rahman, Badhan Saha, and Zaimaa Salsabil. "Recent development trends on polymeric materials—Investigation of properties and applications." (2024): 125-152.
  28. Hassin, Md Shadman, Mohammad Omar Faruk, Mir Iffat Ali, and Shahida Begum. "Evaluation of physical and mechanical properties of graphene oxide reinforced epoxy/Kevlar hybrid composites." Hybrid Advances 6 (2024): 100217.
  29. Rabby, Md Insiat Islam, Md Wasi Uddin, and Farzad Hossain. "Impact of non-uniform heat flux conditions on convective heat transfer and energy efficiency in a corrugated tube." Heliyon 10, no. 11 (2024).
  30. Rabby, Md Insiat Islam, Md Wasi Uddin, N. M. S. Hassan, Maglub Al Nur, Rokib Uddin, Sadman Istiaque, and Md Mirazul Mahmud Abir. "Recent progresses in tri-hybrid nanofluids: A comprehensive review on preparation, stability, thermo-hydraulic properties, and applications." Journal of Molecular Liquids 408 (2024): 125257.
  31. Wahid, SM Taseen, Samiha Tasmiha, Zayed Al Sabid, and Ahmed Afif. "Fabrication of Solar-Powered Pumped-Storage Hydroelectric Power Station." MIST International Journal of Science and Technology (2024): 29-34.

Categories